How to clearing bios password of Acer Aspire 4732z
As in the previous article, this time I will give you tricks about resetting the biospassword on Acer Aspire 4732z .To clear a lost BIOS password (user or supervisor password) you need to short the G61 hardware gap located near Processor.
To clear a BIOS password:
1.Turn off the computer and unplug all the peripherals connected to it.
2.Unplug the power cord from laptop.
3.Remove the battery pack .
4.Remove the lower case cover .
5.Remove the HDD module .
6.Locate the G61 gap. It is near the processor socket.
1.Turn off the computer and unplug all the peripherals connected to it.
2.Unplug the power cord from laptop.
3.Remove the battery pack .
4.Remove the lower case cover .
5.Remove the HDD module .
6.Locate the G61 gap. It is near the processor socket.
7.Use an electrical conductivity tool to short the two contacts on the hardware gap together.
8.While resting the tool on the two contacts, plug one end of the AC adapter into the DC-in jack and plug one end to an electrical outlet.
9.Press thebutton to turn on the system.
10.After the BIOS POST, remove the tool from the hardware gap.
11.Reinstall the HDD module, battery pack, and the lower case cover.
12.Turn on the computer and press F2 during bootup to access the Setup Utility.
13.Press F9 to load the system defaults.
14.Press F10 to save the changes you made and close the Setup Utility.
Tidak ada komentar:
Posting Komentar
BLOG_CMT_createIframe('https://www.blogger.com/rpc_relay.html', '0');